First Round of Hq Pictures

These were taken with my Sony RX100 with no post editing. Make sure you click on these to get the full resolution. Advertisements

Finally Fretting

Using my squeeze clamps I made a fret presser. I used Patrick Hufschmid’s technique to prepare the neck and to hammer the frets in. I used epoxy to fill the slots incase I messed up somewhere. Hammering in frets is awesome. Now all I need to do it find some way of trimming the ends…

Planning out the Fretboard

After reading everything on http://www.sevenstring.org I started to plan out the fretboard. Since it was a MultiScale neck I needed to choose the two scales I’d be using for the neck. I decided on 25 inches to 27 inches, with the perpendicular fret being the nut. After failing my first attempt (major compound error), I…