Imbuya Neck Carved & Odies Oil Tips

This turned out well. I figured the best way to shave down the thickness of the neck was to mark the desired depth and rasp chamfers till that line was reached. Typically I’d just route freehand till that depth was met but I tried something using an auto planer which was unsuccessful so had to…

Teak Oil on Figured Walnut

So I found my bottle of watco teak oil and I decided to apply the initial soak coat of oil. I usually just let the oil pool on top for a bit so it can saturate the wood as much as possible. Then I’ll wipe it off and do the same tomorrow while sanding with…